Betton Grange boiler now complete

by

THE last few stays and rivets went into the refurbished boiler that will operate with new-build GWR 4-6-0 No. 6880 Betton Grange, at Tyseley Locomotive Works in November.

All three sections of the boiler were assembled in time for trial-fitting in the locomotive’s frames on December 3.

It had originally been hoped that a fire could be lit in the grate of No. 6880 by the end of 2018, but discovery of worse-than-anticipated corrosion in the front taper section of the Swindon No. 1 boiler, which came from former ‘Barry 10’ Modified Hall No. 7927 Willington Hall, resulted in a new section having to be made which set completion back by around three months.

Article continues below…
Advert

Enjoy more Heritage Railway reading in the four-weekly magazine.
Click here to subscribe & save.
After more than 18 months’ work at Tyseley Locomotive Works, the overhaul of the boiler from No. 7927 Willington Hall is lowered into the frames of No. 6880 Betton Grange for trial fitting on December 3. LYNN MOORE

The owning group has decided to keep the part-assembled locomotive at Tyseley over the winter to complete several outstanding jobs on the chassis and boiler, with a view to completing hydraulic boiler and steam tests before it returns to the Llangollen Railway, where it is hoped to steam the locomotive by May.

While work on the boiler has been drawing to a conclusion at Tyseley, regular working parties have been busy at the locomotive’s Llangollen base, preparing the bodywork of the Collett 4000-gallon tender paired with Peter Robinson’s GWR 2884 class 2-8-0 No. 3814, for which a hire agreement has been agreed so that No. 6880 can start revenue-earning work as soon as it has been run-in and any initial snags are sorted out.

Read more in Issue 249 of HR – on sale now!

Article continues below…
Advert



Advert
Subscribe to Heritage Railway Magazine Enjoy more Heritage Railway reading in the four-weekly magazine. Click here to subscribe.

Article Tags:

About the Author